We all know that when someone says something is running like clockwork, they are referring to the precision accuracy of quartz clock movements or clock mechanisms. Get the best deals on staiger clock when you shop the largest online selection at eBay.com. Free shipping on many items Browse your favorite brands affordable.

BATTERY REPLACEMENT If the clock begins to loose time, chime weakens, or pendulum stops to swing, this is the sign of weak or exhausted batteries. Friction Fit Clock Inserts. Friction fit clock inserts fit into an existing hole. In other words, drill a hole into any object and just push the clock insert into. If this saves you time and money, please donate for a shoutout: paypal.me/fixed1tThis video is about repairing a Battery operated Quartz Wall Clock that wa.

Quick set up instructions

*These instructions are for the brands we offer including Howard Miller and Seiko Clocks. These may or may not work for other brands. We do not have any instructions for other brands outside of Howard Miller and Seiko clocks.

Welcome to the world of radio controlled timekeeping technology. We hope you will enjoy the convenience of never having to set your clock again and the confidence of knowing exactly what time it is.

• Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery

• Press button to select a time zone. THAT’S IT! During the night your clock will automatically set itself.

For a better understanding of how and why your clock works please continue reading.

Nothing is more precisely measured than time!

And nothing keeps track of time more precisely and trouble free than our radio controlled clocks. Since the beginning of time, man has been fascinated with the measurement of time and has devised more accurate machines to trap and measure time. Today, time is precisely measured in the United States by the most accurate clock in North America, the Atomic Clock of the US National Institute of Standards and Technology, Time and Frequency Division in Boulder, Colorado. A team of atomic physicists continually measures every second of every day to an accuracy of ten billionths of a second per day. These physicists have created an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium 133 atom in a vacuum. This atomic clock regulates the WWVB radio transmitter located in Fort Collins, Colorado, where the exact time signal is continuously broadcast throughout the United States at 60 kHz to take advantage of stable long wave radio paths found in that frequency range. Radio waves at these low frequencies use the earth and the ionosphere as a wave-guide and follow the curvature of the earth for long distances.

The built in antenna system will receive the WWVB signal anywhere in North America within 2000 miles of Fort Collins where long-wave radio reception is undisturbed. A microprocessor activates the receiver and processes the time signal from Fort Collins overnight.

Through the radio signals, our radio controlled clocks always keep precise time. The changeover from standard time to daylight savings time, and vice versa, takes place automatically with the same precision.

Additional details

To set up your clock simply install one fresh AA, LR6 ALKALINE battery. Due to the nature of long wave radio signals it is normally not possible to receive a signal during the day so it is best to install the battery late in the evening. Select your time zone by pressing one of the four time zone buttons PT-Pacific Time, MT-Mountain Time, CT-Central Time, ET-Eastern Time. The time zone buttons may be pressed any time after installing the batteries. If multiple buttons are pressed the clock will set to the time zone selected last. If no time zone is selected the clock will default to Pacific Time. Another time zone can be selected during or after the clock has set itself. Your clock can only set itself to one of the four time zones stated above. For time zones outside of PT, MT, CT or ET you must manually set the time using the Manual Time set button on the back of the movement.

Daylight Savings Time Adjustment.

If you live in Indiana or Arizona you will wish to disable the DST function. After setting your clock press the small button labeled 'DST' located just above and between the ET and CT Time Zone buttons on the back of the movement. Your clock will no longer observe DST.

Manual Setting

Atomic Clocks may also be set manually and be very accurate. Simply insert the battery, press your time zone and then press the flap just above the left side of the battery. Hold until you reach the correct time and then release. Your clock is now an accurate quartz clock until it will find the signal. Your Atomic clock will still continue to look for the signal and start adjusting itself automatically.

When the battery is installed the second hand will advance eight seconds (two seconds per step x four steps). The clock is now searching for a signal. For the initial setting, it is recommended to stand the clock in an upright position near a window. Within five minutes the clock will either receive the WWVB signal and set itself to the exact time, or it will determine that the signal is not receivable at its current location and time of day. If a signal is not receivable it will fast-forward the hands to the 4, 8, or 12 o’clock position and search for WWVB each hour until a signal is received. If the time is manually set the clock will continue to periodically search for a signal and automatically reset the hands when the signal is received.

Select a location to place your radio controlled clock where it will be at least six feet away from a TV, computer, air conditioner or other household electrical appliances. The optimal location is near a window. Windows facing Colorado providing the best signal. The WWVB time signal will easily penetrate Masonry and wood-framed buildings. WWVB will penetrate almost every residential building and most steel buildings if they have adequate windows. It is not possible, however, for WWVB to penetrate most indoor shopping malls and rooms in the center of large office buildings that do not have windows. In buildings that WWVB cannot penetrate you may set the time using the manual time set button. When the clock is exposed to the WWVB signal it will automatically set the hands to the exact time.

Our Rwave, Atomic, Radio Controlled clocks do not receive or process radio-controlled time signals from Germany’s DCF 77, Japan’s J Ga AS, or England’s MSFs atomically regulated transmitters. Our Radio Controlled clocks can be manually set and used anywhere.

If your clock did not set the first time or after daylight savings time change, try the following instructions:

1) Take out the battery and place the battery in backward for about 10 seconds, then replace it again in the correct position.

2) Just after replacing the battery, press the Time Zone button for about 5 seconds on the back that corresponds with the time zone where you are located.

3) Shortly after the hands should start turning 20 times their normal speed and stop at 4:00 or 8:00 or 12:00. This means the clock is now looking or waiting for the signal and the clock movement is good.

4) Place the clock near a westerly window overnight and then the clock should reset overnight and read the correct time.

**If you had previously pushed the manual mode flap (switch), take a pen or paperclip and make sure it is pulled out in the off position.

If you live in the Eastern Time Zone, you should manually set your clock using the following procedure:
1. Take the battery out of the clock.
2. Press the manual time setting tab on the back of the clock 15 times.
3. Put the battery back into the clock.
4. The clock will go to 4:00, 8:00, or 12:00 and stay there while waiting for the signal.
5. Immediately after your clock stops at 4:00, 8:00, or 12:00, push and hold the manual time set tab until you get to the correct time.
If you release the button at the incorrect time, take the battery out and start again.
These clocks will automatically continue to check and adjust after April 1.

For more information on the NIST and radio controlled time, see http://www.boulder.nist.gov/timefreq/

Troubleshooting

The wonderful advantage of owning a radio-controlled clock is that it is virtually trouble-free. If the clock receives a clear signal it will set itself perfectly. If it does not receive a signal consider the following:

Battery - The clock must have a fresh battery to receive and process the time signal.

Location - Try a different location, ideally near a window. It should be at least six feet from computers, TVs, air conditioners, other Radio-Controlled clocks and other electrical appliances that cause interference.

Weather - Electrical storms between you and Colorado during the night will interfere with the WWVB signal.

Daylight Savings Time

The National Institute of Standards and Technology and WWVB encode a special DST 'bit' in the WWVB transmission for DST. Your Radio Controlled clock will read this information and automatically advance the hands one hour in the spring and eleven hours in the fall.

Arizona and Indiana

If you live in an area that does not recognize DST you must press the (unmarked) DST button for one second to deactivate your clock’s DST program. To reactivate the DST program simply press the DST button again for one second.

Frequently Asked Questions

Q. How long will the battery last?

A. A good AA alkaline battery will last over one year. If your clock is located in an area with little interference

where it can quickly receive a signal the battery can last much longer than one year.

Q. Can a Radio Controlled clock be used outdoors?

A. Yes, but only in a dry environment and in a temperature range between 41 F and 131 F. The clock is NOT

water-resistant.

Q. Can the Radio Controlled clock be wired to control timing circuits?

A. No.

Q. Why does the second-hand move only once every two seconds?

A. When the battery drops below 1.25 volts the clock indicates that it is time to change the battery by advancing the second hand in two-second steps. The operating voltage range is 1.25 to 1.75 volts.

Grandfather Clocks - Atomic Clocks - Wall Clocks

Free Nationwide Shipping our selections

See the new WIFI Clocks that use your home network to adjust your clock to the correct time

Movement W2114: Westminster or Bim-Bam, no pendulum
Movement W2115: Westminster or Ave Maria, nopendulum
Movement W2214: Westminster or Bim-Bam, with pendulum
Movement W2215: Westminster or Ave Maria, withpendulum

Wall Clock Models

Unlock the pendulum holder from its shipping position by pushing it to the right with your thumb or finger. SEE PICTURE.Carefully place pendulum on hanger.

Batteries

Use Only Alkaline Duracell C Batteries!

Insert fresh C batteries with the + at the top. Please change your batteries once a year. This willensure accurate timekeeping and a consistent chime sound for your enjoyment.

Low Battery Warning Feature

If your clock starts chiming erratically, or (if so equipped) the pendulum stops, please install new batteries.

Time Setting

Set time by advancing the minute hand (NEVER the hour hand) or turn the hand setting knob at the rear of movementclockwise or counter-clockwise to the correct time. The correct chiming will start at the next full hour. In the interim,the quarter hour chimes may sound at the wrong time. This will correct itself at the next full hour.

If the hour striking is incorrect, move the hour (short) hand to the hour that the clock is striking.

The chime sequence at 1/4, 1/2, and 3/4 hour is electronically programmed and cannot be demonstrated by movingthe minute hand or the time set knob manually.

At the rear of the clock movement are three additional switches and one knob for the following functions:

Melody Switch

Switch with symbols

O = shut off (chime and strike both off)

W = Westminster Chime 4/4 melody plus full hour strike

B = Bim-Bam hour and half hour strike (W2114 and W2214)

A = Ave Maria 4/4 Chime with full hour strike (W2115 and W2215)

Night shut-off and night reduction

Switch with symbols

= 'Sun' position. Clockwill chime and strike during the full 24 hour period.

= 'No Moon' position.The clock will not chime for a period of 8 hours following the time you moved the switch to this position. For example:if you wish the chimes to be silent from 11 p.m. until 7 a.m., move the switch from to sometime between 10:45and 11 p.m. The chimes will automatically become silent each day from 11 p.m. to 7 a.m.

= 'Moon' position. Thechime sound will reduce by half of daytime volume for a period of 8 hours. Use the same setting procedure as for 'NoMoon'.

Volume control

By turning the knob, the chime loudness can be a adjusted. Turning the knob clockwise reduces the volume.

Chime selector

Switch with symbols

By setting the switch to the position and the melody switch to 'W' the clock will chime the Westminster melody every 15 minutes and strikethe hour after it plays the hour chime.

By setting the switch to the position and the melody switch to 'W', the clock will chime the Westminster melody on the hour only, followedby the hour strike.

By setting the switch to the position and the melody switch to 'B' the clock with movement W2114 or W2214 will strike Bim-Bam every hourand half hour.

By setting the switch to the position and the melody switch to 'B' the clock with movement W2114 or W2214 will strike Bim-Bam every hour.

By setting the switch to the position and the melody switch to 'A' the clock with movement W2115 or W2215 will chime the Ave Maria melodyevery 15 minutes and strike the hour after it plays the hour chime.

By setting the switch to the position and the melody switch to 'A', the clock with movement W2115 or W2215 will chime the Ave Maria melodyon the hour only, followed by the hour strike.

Mounting wall clock models

Hang your clock vertically to the desired location. If possible, your clock should be mounted on a wall stud. Besure that the clock will not shift on the wall when the door is opened.

Start pendulum by moving it approximately 1 1/2 inch to the left or right and releasing it. Be sure that the pendulumcan swing freely.

Regulation

Due to the high accuracy and reliability of the quartz movement, adjustment to timekeeping is not necessary.

Instructions for clock with moon phase dial

User%27s Manual Staiger Quartz Clock Replace Battery

The moonphase disc shows you the position of the moon during its 29 1/2 day cycle.

New moon: moon is not visible

Waxing moon: moon is rising on the left side

User 27s Manual Staiger Quartz Clock Replace Battery Pack

Full moon: moon is visible in the center of the dial opening

Waning moon: moon is descending on the right side of the dial opening

The moonphase disc is shifted between 22:00 and 2:00 o'clock. During this time you should not try to set the moondisc by hand.

How to set the moon disc: Inside the back of the clock you can see the back bottom part of the moondisc. Turn this disc (if the shift mechanism is not engaged) to the correct position in the lunar phase.